If you’re experiencing issues with your OVHD (OpenView HD) decoder—such as missing channels, freezing, or sluggish performance—a factory reset might be just what you need. This guide will walk you through the process of resetting your OVHD decoder to its default settings and restoring all your favorite channels.
Read on for a detailed, step-by-step approach to factory resetting and rescanning channels on your OVHD decoder!
Why Factory Reset Your OVHD Decoder?
Before diving into the steps, let’s discuss why a factory reset might be necessary. Here are some common reasons:
- Persistent Freezing or Lag: Decoders can slow down due to accumulated cache or system glitches.
- Channel Issues: Channels may be missing or not updating correctly.
- Unresponsive Remote or Menu: Sometimes, the decoder may fail to respond to commands, requiring a full reset.
- General Troubleshooting: After other solutions (like restarting or refreshing) fail, a reset often resolves deeper software or configuration problems.
Channels include:
- TV Channels
- SABC 1
- SABC 2
- SABC 3
- e.tv /eHD
- eExtra
- eMovies
- eMovies Extra
- eBella
- Trace Sport Stars
- BBC World News
- eToonz
- Mindset
- Da Vinci Learning
- GLOW TV
- Kwesé Free Sports
Steps to Factory Reset Your OVHD Decoder
Performing a factory reset on your OVHD decoder is simple if you follow these steps carefully:
1. Access the Main Menu
- Power on your OVHD decoder and press the Menu button on the remote.
2. Navigate to System Settings
- In the menu, look for System Settings or Installation (the exact name may vary based on your decoder model).
3. Enter the PIN
- You may be prompted to enter a PIN code. The default PIN is typically 1234 or 0000, but this may differ if you’ve customized it.
4. Select the Factory Reset Option
- Scroll down to find Factory Reset or Reset to Defaults, then select this option. Confirm that you want to proceed when prompted.
Note: A factory reset will erase all custom settings and personal configurations, so make sure you’re ready to reset everything to factory defaults.
5. Wait for the Reset to Complete
- Your decoder will begin the reset process and then restart. This may take a few minutes, so be patient.
Once your OVHD decoder reboots, it will be reset to its original settings. The next step is to restore the channels.
Restoring Channels After a Factory Reset
Now that your decoder has been reset, you’ll need to perform a channel scan to restore all your channels. Follow these steps:
1. Open the Channel Scan Menu
- Go back to the Menu and select Installation > Automatic Scan or Channel Search.
2. Choose the Satellite or Frequency
- Make sure your decoder is set to the correct satellite (usually Intelsat 20 for OVHD decoders). Confirm that your signal strength is sufficient before proceeding with the scan.
3. Run the Channel Scan
- Start the channel scan. Your decoder will search for all available channels and automatically add them to your list.
4. Save the Channels
- Once the scan completes, save the settings to ensure all channels are accessible from the main interface.
Tips for a Smooth Reset and Channel Restoration
To make the process as seamless as possible, here are a few additional tips:
- Check Signal Strength: Poor signal can lead to issues during scanning. Ensure that your dish is aligned properly for optimal reception.
- Update Firmware: Some OVHD decoders may require the latest firmware for channels to load correctly. Check if any updates are available during the reset.
- Retry Scanning if Necessary: If some channels are still missing after the scan, try rescanning to see if they appear.
Frequently Asked Questions (FAQs)
Q1: Will I lose my recordings after a factory reset?
Yes, a factory reset clears all personal configurations, which includes any saved recordings on the decoder.
Q2: What if channels don’t restore after the reset?
Check your satellite dish alignment and signal strength first. If issues persist, try rescanning or contacting OVHD support.
Q3: Can I reset without a PIN?
If you’ve forgotten the PIN, try using the default code (1234 or 0000). For further help, contact OVHD customer support.
By following these steps, you can resolve many common OVHD decoder issues and get back to enjoying your favorite channels. Factory resetting and rescanning may take a few minutes, but they’re often worth it for a smoother, error-free viewing experience.
If you found this guide helpful, please share it with others who might be experiencing similar decoder issues